Editing Step 9 —
Install the Y-axis idler

Step Type:

Drag to rearrange

M8x30 Cap Head Screw

Fasten the M8x30 screw through the printed part and into the end of the 3060 extrusion

Take care not to over tighten the M8x30 screws as you can damage the printed part or the threads in the 3060 extrusion

Fasten all four M6x12 screws to secure the mount to the frame

Take care not to over tighten the M6x12 screws as you can damage the printed part

Your contributions are licensed under the open source Creative Commons license.