03. Addons and Upgrades V-Core 3
View
Options
Preview new Authoring Experience
History
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
Introduction
Details
Guide Steps
Review
Quiz
Thread the hex standoffs on to the LDO Orbiter V2 screws.
Do not overtighten the hex standoffs. They are brass and it is possible to strip the threads.
Insert the M3x16 Cap Head Screw in to the rr_toolhead_vc3_ebb42_vertical printed part and thread it on the toolhead.
Take care not to over tighten the M3x16 screws as you can damage the printed parts
2x M3x8 Cap Head Screw
Insert the M3x8 Cap Head Screws in to the printed part and thread them to the hex standoffs
BIGTREETECH EBB42 USB/CAN TOOLBOARD V1.2
Insert the M3x16 Cap Head Screws into the toolboard and thread them into the vertical toolboard mount
« Previous
Next »
Your contributions are licensed under the open source Creative Commons license.
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.