Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

rr_vc4_toolhead_front_idex_t0 assembly

2x M3x40 Countersink screw

The M3x40 countersink screws must go through the holes on the front assembly and thread into the duct assembly.

Take care not to over tighten the screws as you can damage the printed parts

Avoid using a ball end hex key, as they are more prone to damaging the sensitive M3 countersink screw head.

Your contributions are licensed under the open source Creative Commons license.