Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Join the two assemblies together, ensuring they are flush.

2x M3x16 Cap Head Screw

Insert the M3x16 screws through the back part and tighten them into the duct.

M3x8 Cap Head Screw

Feed the M3x8 screw from the opposite side and secure the parts together.

Take care not to over tighten the screws as you can damage the printed parts.

Your contributions are licensed under the open source Creative Commons license.