Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

rr_vc4_toolhead_toolboard_vertical

Insert the M3x35 screws into the Rat Rig toolhead vertical toolboard mount printed part and secure it onto the toolhead.

Take care not to over tighten the M3x35 screws as you can damage the printed parts.

1x M3x8 Cap Head Screw

Insert the M3x8 screw through the printed part and into the thread to attach it to hex standoff.

Your contributions are licensed under the open source Creative Commons license.