Editing Step 4 —
Install the Y belt parts

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Install the vc4_y_belt_body on top of the joiner assembly

Ensure the belt grooves face the inside of the machine

2x M3x12 Cap Head Screws

Feed the M3x12 cap head screws through the vc4_y_belt_body assembly and tighten them into the threads on the joint plate.

Repeat the previous step and install the parts on the other Y Joiner assembly.

Your contributions are licensed under the open source Creative Commons license.