Pending Edits to 10. EVA 3.0 Hex Nut Assembly
Step #10 edited: [Step edited]
Edited by Nick D (1)
(You don’t have enough reputation to patrol this edit.)
| [title] Prepare EVA3 sub assembly parts - Part 2 | |
| [* 2] 1x EVA3 bottom_horns Printed Part | |
| [* 3] 4x M3x35 Cap Head Screw | |
| [* 4] 4x M2.5x8 Cap Head Screw (Included with the Phaetus Rapido HF) | |
| [* 5] 1x EVA3 hotend_rapido Printed Part | |
| [* 6] 1x Phaetus Rapido HF Hotend | |
| [* 10] Follow the included assembly instructions to prepare the Rapido HF for use. The groovemount adapter which is pre-installed ***must be removed*** for use on EVA3 | |
| [* 7] 8x Hex Nut - M3 | |
| - | [* 8] 1x 43.7mm PTFE Tube |
| + | [* 8] 1x 43.7mm PTFE Tube (note: the tube in the eva hardware pack is meant to be cut) |