Help
Sebastian Krzakowski
@artemis
Sebastian Krzakowski
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 07/22/2024 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 07/22/2024 | |
The Z0 Stepper must be connecter to driver 6.
Z0 is the front left stepper, when looking at the machine from the front.
The Z1 Stepper must be connecter to driver 7.
Z1 is the rear stepper, when looking at the machine from the front.
The Z2 Stepper must be connecter to driver 8.
Z2 is the front right stepper, when looking at the machine from the front.
To support the five screws, you can use light paper-painter's tape.