You're viewing a previously published revision of this guide.  View latest revision

Older
Sep 04, 2024 - 03:09:00
Sep 04, 2024 - 03:09:04 Sep 04, 2024 - 03:09:41 Sep 04, 2024 - 03:09:42 Sep 04, 2024 - 03:09:48 Sep 04, 2024 - 03:09:44 Sep 04, 2024 - 03:09:26 Sep 04, 2024 - 03:09:07 Sep 04, 2024 - 03:09:16 Sep 04, 2024 - 03:09:52 Sep 04, 2024 - 03:09:00 Sep 04, 2024 - 03:09:59 Sep 03, 2024 - 04:09:30 Sep 03, 2024 - 04:09:01
Newer

01. Rat Rig V-Core 4 preparation

Written By: Rat Rig
  • Comments: 0
  • Favorites: 0
  • Completions: 2

Steps

2

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Remove the M3x40 Countersink screw Remove the 3x6x30mm spacer Remove the four M6x12 Cap head Screws

    • Remove the M3x40 Countersink screw

    • Remove the 3x6x30mm spacer

    • Remove the four M6x12 Cap head Screws

    • Partially unthread the M5x45 cap head screws, but do not remove them completely; just disengage them from the hidden M5 locking nut

    • Remove the top assembly as shown

  2. Remove all the M6x12 Cap Head Screws Remove the stepper motor assembly from the V-Core 4 Remove the stepper motor assembly from the V-Core 4

    • Remove all the M6x12 Cap Head Screws

    • Remove the stepper motor assembly from the V-Core 4

Author

Rat Rig

Member since: 7/10/20

48,550 Reputation

105 Guides authored

View Statistics:

Past 24 Hours: 3

Past 7 Days: 39

Past 30 Days: 225

All Time: 3,895