You're viewing a previously published revision of this guide.  View latest revision

Older
Mar 03, 2025 - 09:03:08
Mar 21, 2025 - 07:03:33 Mar 21, 2025 - 07:03:31 Mar 06, 2025 - 09:03:42 Mar 06, 2025 - 05:03:12 Mar 06, 2025 - 05:03:26 Mar 06, 2025 - 05:03:50 Mar 06, 2025 - 05:03:02 Mar 06, 2025 - 05:03:24 Mar 06, 2025 - 05:03:20 Mar 06, 2025 - 05:03:41 Mar 05, 2025 - 08:03:26 Mar 05, 2025 - 08:03:23 Mar 05, 2025 - 05:03:55 Mar 05, 2025 - 05:03:45 Mar 05, 2025 - 05:03:37 Mar 05, 2025 - 04:03:48 Mar 05, 2025 - 03:03:15 Mar 05, 2025 - 03:03:20 Mar 05, 2025 - 03:03:58 Mar 05, 2025 - 03:03:46 Mar 05, 2025 - 03:03:20 Mar 05, 2025 - 03:03:13 Mar 05, 2025 - 02:03:33 Mar 05, 2025 - 02:03:25 Mar 05, 2025 - 02:03:44 Mar 05, 2025 - 02:03:31 Mar 05, 2025 - 02:03:37 Mar 05, 2025 - 02:03:35 Mar 05, 2025 - 02:03:28 Mar 05, 2025 - 02:03:54 Mar 05, 2025 - 02:03:50 Mar 05, 2025 - 02:03:50 Mar 05, 2025 - 02:03:44 Mar 05, 2025 - 02:03:41 Mar 05, 2025 - 02:03:37 Mar 05, 2025 - 02:03:41 Mar 05, 2025 - 02:03:04 Mar 05, 2025 - 02:03:12 Mar 05, 2025 - 01:03:19 Mar 05, 2025 - 01:03:38 Mar 05, 2025 - 01:03:31 Mar 05, 2025 - 01:03:51 Mar 03, 2025 - 09:03:50 Mar 03, 2025 - 09:03:42 Mar 03, 2025 - 09:03:16 Mar 03, 2025 - 09:03:08 Mar 03, 2025 - 09:03:38 Mar 03, 2025 - 09:03:04 Mar 03, 2025 - 09:03:24 Mar 03, 2025 - 09:03:58 Mar 03, 2025 - 09:03:08 Mar 03, 2025 - 09:03:58 Mar 03, 2025 - 09:03:21 Mar 03, 2025 - 08:03:41 Mar 03, 2025 - 08:03:00 Mar 03, 2025 - 05:03:25 Mar 03, 2025 - 05:03:26 Mar 03, 2025 - 05:03:46 Mar 03, 2025 - 05:03:01 Mar 03, 2025 - 05:03:27 Mar 03, 2025 - 05:03:56 Mar 03, 2025 - 05:03:15 Mar 03, 2025 - 05:03:37 Mar 03, 2025 - 05:03:10 Mar 03, 2025 - 05:03:27 Mar 03, 2025 - 05:03:48 Mar 03, 2025 - 05:03:59 Mar 03, 2025 - 05:03:18 Mar 03, 2025 - 05:03:36 Mar 03, 2025 - 05:03:04 Mar 03, 2025 - 05:03:22
Newer

04. Z-Axis Assembly

Written By: Rat Rig
  • Comments: 0
  • Favorites: 0

Steps

10

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. T-Slot extrusion 40120 - 502mm Rat Rig StrongHold ONE CNC - Z-Axis Bottom 10mm 3x M12x25 Countersink screws

    • T-Slot extrusion 40120 - 502mm

    • Rat Rig StrongHold ONE CNC - Z-Axis Bottom 10mm

    • 3x M12x25 Countersink screws

    • Both plates must be facing upwards.

    • Rat Rig StrongHold ONE CNC - Z-Axis Top 10mm

    • 3x M12 Washer

    • 3x M12x25 Cap Head Screw

  2. Place one Z linear rail assembly on the designated T-slot. Insert the two align_40120_mgn15 printed jigs in the T-Slot and rail. Make sure the align_40120_mgn15 printed jigs are correctly placed and centering the rail on the T-slot

    • Place one Z linear rail assembly on the designated T-slot.

    • Insert the two align_40120_mgn15 printed jigs in the T-Slot and rail.

    • Make sure the align_40120_mgn15 printed jigs are correctly placed and centering the rail on the T-slot

    • Tighten the linear rails screws one at a time starting from the front and making your way towards the back, one by one.

    • MGN15 Rails should be tightened to 98 N-cm of torque, overtightening the screws will result in rail binding.

  3. Insert wisdom here Insert wisdom here Insert wisdom here

    • Insert wisdom here

  4. Insert wisdom here Insert wisdom here

    • Insert wisdom here

  5. Insert wisdom here Insert wisdom here Insert wisdom here

    • Insert wisdom here

  6. Insert wisdom here Insert wisdom here Insert wisdom here

    • Insert wisdom here

  7. Insert wisdom here Insert wisdom here

    • Insert wisdom here

  8. Insert wisdom here Insert wisdom here Insert wisdom here

    • Insert wisdom here

  9. Insert wisdom here Insert wisdom here Insert wisdom here

    • Insert wisdom here

  10. Insert wisdom here Insert wisdom here

    • Insert wisdom here

Author

Rat Rig

Member since: 7/10/20

48,550 Reputation

105 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 24

Past 30 Days: 185

All Time: 1,484