Skip to main content
/

Site Navigation

Your Account

Choose Language

  1. Low Profile Screw M5x20mm. You will use them to clamp your router inside the mount. No need to tighten them all the way down for now. Low Profile Screw M5x8mm Low Profile Screw M5x10mm
    • Low Profile Screw M5x20mm. You will use them to clamp your router inside the mount. No need to tighten them all the way down for now.

    • Low Profile Screw M5x8mm

    • Low Profile Screw M5x10mm

    • 90ยบ Angle Corner Connector. Position it so it's perfectly flush with the back of the mount.

    • Drop-in T-Nut M5 - set in position, but don't tighten yet.

    • After assembling the mount, fit it inside the Z C-Beam slots, checking if it's perpendicular to it, and tighten the M5x8mm screws.

    • The Mount position depends on what jobs you are planning to do, however 1/3 of the way up the extrusion is a good position for normal work.

Finish Line

Rat Rig

Member since: 07/10/2020

9,611 Reputation

71 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 9

All Time: 73