09. Drag Chain Assembly

Written By: Rat Rig
  • Comments: 1
  • Favorites: 0

Steps

6

Sections

1

Flags

0

  1. If your machine has the same length on X and Y, both drag chains on your wiring kit will have the same length. Otherwise, note that the drag chain for a specific axis will be around 200mm longer than that axis. M4 Hex Nut

    • If your machine has the same length on X and Y, both drag chains on your wiring kit will have the same length. Otherwise, note that the drag chain for a specific axis will be around 200mm longer than that axis.

    • M4 Hex Nut

    • Y Drag Chain Bottom Mount

    • Cap Head Screw M4x20mm

    • Y Drag Chain Top Mount

    • Cap Head Screw M4x25mm

    • Y Drag Chain

    Edit

  2. Cap Head Screw M4x8mm Drop-in T-Nut M4. Set into position, but don't tighten yet.

    • Cap Head Screw M4x8mm

    • Drop-in T-Nut M4. Set into position, but don't tighten yet.

    • Cap Head Screw M4x20mm

    • X Drag Chain Mount

    • M4 Hex Nut

    • X Drag Chain

    Edit
  3. Edit

  4. Cap Head Screw M5x45mm Hex Locking Nut M5

    • Cap Head Screw M5x45mm

    • Hex Locking Nut M5

    Edit

  5. Cap Head Screw M5x50mm Hex Locking Nut M5

    • Cap Head Screw M5x50mm

    • Hex Locking Nut M5

    Edit

  6. Fit the Drop-in T-Nut mounted on the drag chain inside the 2040 slot and tighten the screw to lock it in place. Fit the Drop-in T-Nut mounted on the drag chain inside the 2040 slot and tighten the screw to lock it in place.

    • Fit the Drop-in T-Nut mounted on the drag chain inside the 2040 slot and tighten the screw to lock it in place.

    Edit
Finish Line

Author

Rat Rig

Member since: 07/10/2020

33,463 Reputation

89 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 431