Changes to 02. Common components Introduction

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged
Introduction
***BEFORE STARTING:***
***Before beginning this guide, you must prepare all the necessary wires for the assembly. Below is a list of the required wires. The following nomenclature will be used: (Wire Length)_''(AWG)_''(Wire Color)_(A-End Connector)_(B-End Connector) (ID number).***
''Use a small piece of tape to label each wire to ensure a smooth assembly process.''
* 700mm - 16AWG RED (A-Fork, B-Ferrule) (0)
* 700mm - 16AWG RED (A-Fork, B-Fork) (1)
* 150mm - 16AWG RED (A-Fork, B-Ferrule) (2)
* 440mm - 16AWG RED (A-Fork, B-Ferrule) (3)
* 120mm - 16AWG RED (A-Fork, B-Fork) (4)
* 2x 800mm - 16AWG RED (A-Fork, B-Fork) (5)
* 740mm - 16AWG RED (A-Fork, B-Ferrule) (6)
* 740mm - 16AWG BLACK (A-Fork, B-Ferrule) (7)
* 700mm - 16AWG BLACK (A-Fork, B-Ferrule) (8)
* 100mm - 16AWG BLACK (A-Fork, B-Ferrule) (9)
* 900mm - Multicore 2 Conductor - 24AWG (10)