Step Type:

Drag to rearrange

3030 Drop In T-Nut M6

Slide the 3030 T-Nut behind the lower screw hole on the Z-axis motor mount as shown

Fasten the M6x12 screw into the 3030 T-Nut

Take care not to over tighten the M6x12 screw as you can damage the printed part

Slide the 3030 T-Nut behind the upper screw hole on the Z-axis motor mount as shown

Fasten the M6x12 screw into the 3030 T-Nut

Take care not to over tighten the M6x12 screw as you can damage the printed part

Your contributions are licensed under the open source Creative Commons license.