Step Type:

Drag to rearrange

If the 4x Flat Square Nut - M3 are pre-installed inside the LGX Lite, you can skip this step

Carefully remove the face plate from the LGX Lite assembly

M3 Square Nut

Insert one M3 square nut into each of the marked holes on the LGX Lite

Re-install the LGX Lite face plate

Carefully remove the rear plate from the LGX Lite assembly

Insert one M3 square nut into each of the marked holes on the LGX Lite

Re-install the LGX Lite back plate

Your contributions are licensed under the open source Creative Commons license.