Step Type:

Drag to rearrange

Upper CoreXY idler assembly from Step 3

Position the upper CoreXY idler assembly onto the V-Core 3 frame as shown

Tighten the two M6x12 screws to secure the upper CoreXY idler assembly to the V-Core 3 frame

Make sure the assembly is seated against the front 3030 extrusion before tightening the M6x12 screws

M5 Nylon Locking Hex Nut

Fasten the M5 hex nut onto the M5x45 screw to secure the bearing assembly in place

Your contributions are licensed under the open source Creative Commons license.