Step Type:

Drag to rearrange

sh_one_y_endstop_mount Printed Part

Proximity Sensor

Insert the M3x35 Cap Head Screws on the endstop and through the Y mount

Tighten the M3x35 Cap Head Screws with the M3 Nylon Locking Hex Nut

Insert a two M6x12 Cap Head Screws on the mount

Lightly thread the M6 T-nuts on the screws, Don't tighten them

Take care not to over tighten the screws as you can damage the printed parts

Your contributions are licensed under the open source Creative Commons license.