Step Type:

Drag to rearrange

1530mm 15x30 Drag Chain

2100mm for the StrongHold ONE.

The ends of the drag chain need to be oriented correctly

If your drag ends are oriented as shown in the first image, skip to the next step

Remove the drag chain end by either compressing or expanding the link in the chain, as shown

Once removed, flip the orientation of the end and re-install it.

It may be easier to remove the drag chain end by opening the drag chain link next to the end. The drag chain is designed to be opened to allow easier installation and maintenance.

Your contributions are licensed under the open source Creative Commons license.