Editing Step 26 —
Prepare the Emergency button

Step Type:

Drag to rearrange

Open the emergency button by removing the four screws

Open a hole on the emergency button body, either by snapping a removable disk or drilling a hole

Prepare two wires. These must be long enough to connect the button to the AXBB and place the emergency button on your desired location.

Insert one wire on one side

Tighten the screw to hold it in place

Insert another wire to the other side

Tighten the screw to hold it in place

Make sure to feed the wires through the hole made previously and close the emergency button with the four screws.

Your contributions are licensed under the open source Creative Commons license.