Step Type:

Drag to rearrange

Assembly from the previous step

6x M8x22 Cap Head Screws

6x 4040 Drop-in T-nut M8

Loosely thread a 4040 T-Nut on to each of the M8x22 screws. Do not tighten them at this point.

2x M6x70 Cap Head Screws

2x Square nut M6

Do not fully fasten the M6x70 screws at this point. They will be used to hold the router in place later in the assembly

Your contributions are licensed under the open source Creative Commons license.