Editing Step 10 —
Assemble the cable guides

Step Type:

Drag to rearrange

(26x) M3x6 Cap Head Screw + M3 Washer

Insert a screw and washer from the front of the plate in every marked hole

Secure the eight vc4_cable_guide_4 assembly using M3x6 screws and heat inserts in the back at the designated locations.

Secure the five vc4_cable_guide_5 assembly using M3x6 screws and heat inserts in the back at the designated locations.

Your contributions are licensed under the open source Creative Commons license.