Roald Baudouxc

03. Spool Holder v2.0

I translate: M6 for 3030 profiles (V-Core 3) and M5 for 2020 /2040 profiles (V-Core Pro).

Why is the kit provided with M5 screws besides the M6? Are they meant to be used with the V-Core Pro???

Suggestion: if needed pass cable ties (without closing them) in the two holes on the right side of the front part. It will be a bit more difficult to pass them when the carriage is fully assembled on the printer.

Some guidelines about fan orientation would be welcome!

For the V-Core Pro 1.3: you want 20mm screws instead of 12mm ones.

If you’re following this tutorial to build the V-Core Pro 1.3 upgrade instead of the V-Core 3, replace the 35mm M3 screws with 40mm screws.