I used the M3x25 in the top two holes to snug them tight against the frame. Then pulled them out and then the M3x20s would finally grab a few threads.
Thanks Joshua! Excellent tip!!!
To make the insertion of the 2020 into the plastic Joiners easier, I beveled the sharp edges at the end of the 2020 with a small needle file.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
I used the M3x25 in the top two holes to snug them tight against the frame. Then pulled them out and then the M3x20s would finally grab a few threads.
Thanks Joshua! Excellent tip!!!
To make the insertion of the 2020 into the plastic Joiners easier, I beveled the sharp edges at the end of the 2020 with a small needle file.