The same goes for this printed "motor plate", it serves absolutely no purpose at all. Just use the metal plates that come with the kit, and don't use the printed parts. All they do is make it much more difficult to assemble.
The "motor plate" parts serve absolutely no purpose. After running into significant vibration issues, I decided to remove them, as they are a waste of filament. They also make it much more difficult to assemble the printer.
This guide has a TON of errors, and the step order does not work. 1) the block that attached to the linear rail mount must be completed immediately after assembly of the part, and 2) the parts need to immediately be mounted on the printer instead of being set aside. If you set the parts aside and mount them in the order stated, you won't be able to mount anything.
Also, I am using an LGX with a Mosquito Magnum, and this does not work for anything but the LGX Lite w/ Rapido. It will take several hours going back and forth between this manual and the EVA documents in order to get this working. Many of the screws called out are the wrong size as well, so you might need to find other parts. The screws called out to attach the shroud are like 5mm to short.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
The same goes for this printed "motor plate", it serves absolutely no purpose at all. Just use the metal plates that come with the kit, and don't use the printed parts. All they do is make it much more difficult to assemble.
The "motor plate" parts serve absolutely no purpose. After running into significant vibration issues, I decided to remove them, as they are a waste of filament. They also make it much more difficult to assemble the printer.
The kits do not come with this sleeving, and it isn't listed on the BOM either.
The trim part for the rear motor is upside down, or mirrored. Until it is fixed, you will need to mirror the part in order to use it.
This guide has a TON of errors, and the step order does not work. 1) the block that attached to the linear rail mount must be completed immediately after assembly of the part, and 2) the parts need to immediately be mounted on the printer instead of being set aside. If you set the parts aside and mount them in the order stated, you won't be able to mount anything.
Also, I am using an LGX with a Mosquito Magnum, and this does not work for anything but the LGX Lite w/ Rapido. It will take several hours going back and forth between this manual and the EVA documents in order to get this working. Many of the screws called out are the wrong size as well, so you might need to find other parts. The screws called out to attach the shroud are like 5mm to short.