a good video i found on everything you need to know is here: https://youtu.be/loBHYcifzRM?t=1526 (start at 15:26) In case the link doesn't work in this comment, search for "Cheap Linear rail "review?": part 1 does it suck, and how to lube it." by Alex Kenis
Another commentor mentioned this, but a good "new" final step for this section would be to take your side and back panels and lay them over the sides to make sure the mounting holes line up on all sides for the supporting extrusions. It's going to suck if you get all the way to the panel mounting step and you find out you're off by a few critical millimeters.
FYI for IDEX builders.... It looks like if you're building an enclosed IDEX, then the top X extrusion doesn't go all the way from Z-left to Z-right... it looks like there is a pass through part.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
a good video i found on everything you need to know is here: https://youtu.be/loBHYcifzRM?t=1526 (start at 15:26) In case the link doesn't work in this comment, search for "Cheap Linear rail "review?": part 1 does it suck, and how to lube it." by Alex Kenis
Another commentor mentioned this, but a good "new" final step for this section would be to take your side and back panels and lay them over the sides to make sure the mounting holes line up on all sides for the supporting extrusions. It's going to suck if you get all the way to the panel mounting step and you find out you're off by a few critical millimeters.
FYI for IDEX builders.... It looks like if you're building an enclosed IDEX, then the top X extrusion doesn't go all the way from Z-left to Z-right... it looks like there is a pass through part.