You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 18, 2021 - 09:02:59
Apr 18, 2022 - 07:04:25 Apr 18, 2022 - 07:04:33 Apr 18, 2022 - 07:04:43 Sep 22, 2021 - 11:09:51 Apr 08, 2021 - 04:04:18 Apr 08, 2021 - 04:04:14 Mar 09, 2021 - 07:03:39 Feb 24, 2021 - 11:02:52 Feb 18, 2021 - 11:02:40 Feb 18, 2021 - 11:02:31 Feb 18, 2021 - 11:02:53 Feb 18, 2021 - 10:02:50 Feb 18, 2021 - 09:02:40 Feb 18, 2021 - 09:02:09 Feb 18, 2021 - 09:02:59 Feb 18, 2021 - 09:02:16 Feb 18, 2021 - 09:02:49 Feb 18, 2021 - 09:02:44 Feb 18, 2021 - 09:02:18
Newer

07. Drag Chains

Written By: Rat Rig (and one other contributor)
  • Comments: 8
  • Favorites: 0
  • Completions: 3

Steps

2

Sections

1

Flags

0

Quiz

0

  1. Cap Head Screw M4x10mm X Drag Chain (will be slightly longer than your X axis)

    • Cap Head Screw M4x10mm

    • X Drag Chain (will be slightly longer than your X axis)

    • Drop-in T-Nut M5

    • Set T-Nuts in position, but don't tighten them.

  2. Cap Head Screw M4x20mm

    • Cap Head Screw M4x20mm

    • Hex Locking Nut M4

    • Slide the T-Nuts inside the slot, bring the tip of the drag chain to the end of the C-Beam profile and tighten down the screws, to lock it in place.

Author

with 1 other contributor

Rat Rig

Member since: 7/10/20

48,550 Reputation

105 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 3,112