Editing Step 11 —
Mount the Raspberry Pi

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

The electronics assembly is the same regardless of the Raspberry Pi model used.

Raspberry Pi

4x M2.5x16mm Cap Head Screw

4x M3x5mm Nylon Spacer

4x M2.5 Locking Hex Nut

Mount the Raspberry Pi with the fasteners in the shown order.

Place the Raspberry Pi so the USB ports are on the left.

Take care not to over-tighten the screws as you can damage the panel.

Your contributions are licensed under the open source Creative Commons license.