Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

This STEP should have been completed here: 01. Frame Assembly

If you didn't mount the wire guides during the frame assembly, you need to remove the Electronics subframe in order to install the wire guides.

3x Electronics Wire Guide Body

6x M6x12mm Cap Head Screw

6x 3030 Drop-in T-Nut - M6

15x Electronics Wire Guide Clip

Store the Electronics Wire Guide Clips aside for now, they will be needed later.

Loosely thread the 3030 T-Nuts onto the M6x12 screws. Do not tighten them at this point.

Your contributions are licensed under the open source Creative Commons license.