Editing Step 44 —
Bed Thermistor

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Bed Heater with the incorporated Thermistor.

Do not mistake the bed heater wires for the bed thermistor wires. The thermistor wires are the ones with the JST 2 wire connector.

The thermistor is a resistor that strongly varies with temperature. When connecting a resistor you don't have to worry about cable order as resistors don't have polarity.

The magnetic sheet and heater pad will be installed later during the commissioning guide. Do not install them now.

Your contributions are licensed under the open source Creative Commons license.