Step Type:

Drag to rearrange

pillow_block and axial thrust bearing assembly

lead_screw_motor_cage_front_3.1 printed part

M3x18 Cap Head Screw

48mm NEMA17 Stepper Motor

Insert the NEMA17 motor into the lead_screw_motor_cage printed part, as shown

Insert each M3x18 cap head screw through the pillow block, the lead screw motor cage, and fasten them into the NEMA17 motor

Take care not to over tighten the M3x18 screws as you can damage the printed parts

Your contributions are licensed under the open source Creative Commons license.