Step Type:

Drag to rearrange

2x HG15 3030 alignment tool

3x Linear rail - HG15 400mm

Do not allow the linear rail carriage to leave the end of the rail

21x M4x16 Cap Head Screw

21x 3030 M4 Drop in T-Nut

Loosely thread T-nut and a screw to every hole in the linear rails

V-Core 4 400 - 24 T-Nuts and Screws; V-Core 4 500 - 30 T-Nuts and Screws;

Repeat these steps for the other 2 rails

Your contributions are licensed under the open source Creative Commons license.