Step Type:

Drag to rearrange

vc4_magnet_frame

Magnet - Neodymium disc 10x4mm

3030 Drop-in T-Nut - M6

M6x12 Cap Head Screw

Loosely thread the 3030 T-Nuts onto the M6x12 screws. Do not tighten them at this point.

Please verify the magnet polarity in relation to the magnets on the door panel. If the polarity is inverted, the magnets will repel each other instead of attracting.

Prepare ten assemblies

Your contributions are licensed under the open source Creative Commons license.