Step Type:

Drag to rearrange

Crimp the Connector - Molex Micro-Fit (43025 compatible) to all the 4028 wires

The small tab must be facing upwards.

Insert the crimps inside the Connector - Molex Micro-Fit - 4 Pin - Male (43025-0400) as shown

1 - 12V Red - NIDEC fan

2- GND Black - NIDEC fan

3- PWM Blue - NIDEC fan

4- Tac White -NIDEC fan (not used with the Octopus board(

Insert the crimp on the connector until you hear a "Click"

Your contributions are licensed under the open source Creative Commons license.