Step Type:

Drag to rearrange

The probe has three wires, if your colours are different, please check the supplier datasheet.

If you are using a XYZ probe from OpenBuilds, the connector on the probe has

Blue - 24V- (GND)

Brown or Red - 24V+ and I+ terminals.

Black (signal wire)- I- terminal

Crimp the JST-XH into the wires ensuring the crimp has a solid connection to the wire core.

1x JST-XH 3Pins

Inset the crimps into the JST-XH housing, to follow the shown wire colour scheme.

Your contributions are licensed under the open source Creative Commons license.