Editing Step 14 —
Route the Y endstop

Step Type:

Drag to rearrange

Route the Y endstop cable as shown in the picture.

Cut the cables to the final length, double check if the cable has the appropriate length before cutting.

Label the cable at the end, with a piece of duct tape for example.

Crimp the JST-XH into the wires ensuring the crimp has a solid connection to the wire core.

1x JST-XH 3Pins

Inset the crimps into the JST-XH housing, follow the shown wire colour scheme.

Your contributions are licensed under the open source Creative Commons license.