Editing Step 8 —
X linear rails

Step Type:

Drag to rearrange

Place one X linear rail assembly on the designated T-slot.

Insert the two align_40120_mgn15 printed jigs in the T-Slot and rail.

Ensure the Y rail is sitting flush against the Mill front Y plate.

Make sure the align_40120_mgn15 printed jigs are correctly placed and centering the rail on the T-slot

Tighten the linear rails screws one at a time starting from the front and making your way towards the back, one by one.

MGN15 Rails should be tightened to 98 N-cm of torque, overtightening the screws will result in rail binding.

Your contributions are licensed under the open source Creative Commons license.