Editing Step 21 —
Assemble the Z-Axis

Step Type:

Drag to rearrange

Place the Z-axis assembly on the Z tower, ensuring the M8 Low Head

The Z-axis is heavy and difficult to manage alone. Please request assistance from another person to hold the Z-axis while you tighten the screws.

Assemble the M8x25 cap head screws by inserting them through the M8 washers and the Z plates. Then, place an M8 washer on the rear and secure everything with an M8 nylon locking nut.

4x M8x25 Cap Head Screw

8x M8 Washer

4x M8 Nylon Locking Hex Nut

Your contributions are licensed under the open source Creative Commons license.