Step Type:

Drag to rearrange

1x CNCDrive AXBB-E CNC controller

4x Spacer - Nylon - 4.2x6.3x10mm

4x M4x25 cap head screw

Install an M4x25 screw through each mounting hole on the AXBB-E CNC controller

Install a nylon spacer on to each M4x25 screw

Align the M4x25 screws with the holes in the panel as shown

Keep supporting the AXBB-E CNC controller until the locking hex nuts are installed in the next step

Your contributions are licensed under the open source Creative Commons license.