Route the wires on the back of the enclosure as shown.

150mm - 22AWG RED (A-Ferrule, B-Ferrule) (10) Connect the wire from the Red PTFix block to the +24V input on the AXBB-E

150mm - 22AWG BLACK (A-Ferrule, B-Ferrule) (11) Connect the wire from the Black PTFix block to the -24V input on the AXBB-E

500mm - 22AWG RED (A-Ferrule, B-Fork) (12) Connect the fork end to the +V terminal on the 5V power supply and the ferrule end in the 5V+ terminal on the AXBB-E.

2x 500mm - 22AWG BLACK (A-Ferrule, B-Fork) (13) Connect the wire from the -V terminal on the 5V Power supply using the fork connector and connect the ferrule in the Black PTFix block. The second (13) wire should be connected from the -V terminal on the 5V Power supply using the fork connector and then connected to the AXBB-E 5V0 terminal