Editing Step 11 —
Wire the VFD PWM control

Step Type:

Drag to rearrange

900mm - Multicore 2 Conductor - 24AWG (A-2xFerrule, B-2xFerrule) (11)

Connect the Red wire to the VI input on the VFD.

Connect the Black wire to the ACM input on the VFD

Ensure the VI jumper is set as shown.

Connect the Red and Black ferrules as to the Rodent output as shown.

Ensure the VFD Jumper wire is set between the ACM and FOR terminals.

Your contributions are licensed under the open source Creative Commons license.