Editing Step 6 —
Wire the Power supply

Step Type:

Drag to rearrange

600mm - 16AWG RED (A-Fork, B-Ferrule) (7)

Wire (7) should be attached to the power supply 02. Common components . Route it as shown and connect the ferrule end to the +24V RED PTFix terminal.

600mm - 16AWG BLACK (A-Fork, B-Ferrule) (8)

Wire (8) should be attached to the power supply 02. Common components . Route it as shown and connect the ferrule end to the -24V BLACK PTFix terminal.

After insertion, attempt to pull the wire to verify that it is securely attached.

Your contributions are licensed under the open source Creative Commons license.