Editing Step 5 —
Install the Rodent

Step Type:

Drag to rearrange

Install the component using the designated holes.

4x Hex Locking Nut - M3

4x Nylon Spacer - 3.2x6x16mm

BigTreeTech & Rat Rig - Rodent CNC Controller TMC2160

4x M3x25 Cap Head Screw

Insert the M3x25 cap head screws through the rodent and nylon spacers, then through the designated holes on the plate. Finally, secure them by fastening to the M3 hex locking nuts on the back.

Your contributions are licensed under the open source Creative Commons license.