Rat Rig Universal CNC Electronics Enclosure - Door

(8x) M6x12 Cap Head Screw + M6 Washer

Door magnet panel assembly

Feed the M6x12 Cap Head screws through the M6 washers and into the door panel, then tighten them onto the hex locking nuts on the door magnet panel assembly.

Take care not to overtighten the M6x12 screw, as you may damage the printed parts.

(4x) M5x16 Cap Head Screw + M5 Washer

V-Slot Door Handle

(4x) M5 Hex locking nut + M5 washer