Page 1 of 3
Next
prepare 4x M3x40 countersink screws
There is no M5x14 with the kit, but I received 3 x M5x12 screws alone in a bag
Can be user a 3x20mm screw here
thank you, amazing tip!
the difference between the micro and mini shim should be explained before doing idlers steps.
I ordered the printed parts and have one included!
Would be cleaner if the motor could be oriented to the side so the cable wouldn’t go toward center. The printed part has to suffer a modification for that.
Here too, I recommend a little bit of lithium grease on the balls of the thrust bearing.
I would recommend to put a little bit of lithium grease on the balls of the bearings, with the opening turn up. I don’t trust dry bearings.
thanks you for that information, It should be precised in the step.
Page 1 of 2
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
prepare 4x M3x40 countersink screws
There is no M5x14 with the kit, but I received 3 x M5x12 screws alone in a bag
Can be user a 3x20mm screw here
thank you, amazing tip!
the difference between the micro and mini shim should be explained before doing idlers steps.
I ordered the printed parts and have one included!
Would be cleaner if the motor could be oriented to the side so the cable wouldn’t go toward center. The printed part has to suffer a modification for that.
Here too, I recommend a little bit of lithium grease on the balls of the thrust bearing.
I would recommend to put a little bit of lithium grease on the balls of the bearings, with the opening turn up. I don’t trust dry bearings.
thanks you for that information, It should be precised in the step.
Page 1 of 2
Next