The routing shown on the second picture is incorrect. It needs to go through the smaller hole on the side, not the bigger hole in the middle
This should say M6 Nylon Locking nut, not M5
I think the cable orientation shown with the arrow is incorrect. Check the last image in step 18 for the correct orientation.
The 2x vc4_arm_front are printed in black, so look for a black part instead of green.
M3x18 Cap Head Screw (This should be M3x12 Cap Head Screw)
I expect the 500mm build needs to use 30 M4x16 and 30 M4 drop in T-Nuts, maybe this should be clarified?
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
The routing shown on the second picture is incorrect. It needs to go through the smaller hole on the side, not the bigger hole in the middle
This should say M6 Nylon Locking nut, not M5
I think the cable orientation shown with the arrow is incorrect. Check the last image in step 18 for the correct orientation.
The 2x vc4_arm_front are printed in black, so look for a black part instead of green.
M3x18 Cap Head Screw (This should be M3x12 Cap Head Screw)
I expect the 500mm build needs to use 30 M4x16 and 30 M4 drop in T-Nuts, maybe this should be clarified?