Changes to 03. Intermediate Bundle Introduction

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged
Category
04. Universal CNC electronics enclosure
Type
how-to
Title
03. Intermediate Bundle
Introduction
***BEFORE STARTING:***
***Before beginning this guide, you must prepare all the necessary wires for the assembly. Below is a list of the required wires. The following nomenclature will be used: (Wire Length)_''(AWG)_''(Wire Color)_(A-End Connector)_(B-End Connector)_(ID number).***
''Use a small piece of tape to label each wire to ensure a smooth assembly process.''
* 120mm - 16AWG RED (A-Fork, B-Fork) (4)
* 800mm - 16AWG RED (A-Fork, B-Ferrule) (5)
* 800mm - 16AWG RED (A-Fork, B-Fork) (6)
* 740mm - 16AWG RED (A-Fork, B-Ferrule) (7)
* 740mm - 16AWG BLACK (A-Fork, B-Ferrule) (8)
* 700mm - 16AWG BLACK (A-Fork, B-Ferrule) (9)
* 100mm - 16AWG BLACK (A-Fork, B-Ferrule) (10)
* 900mm - Multicore 2 Conductor - 24AWG (A-2xFork, B-2xFerrule) (11)
* 200mm - 18AWG BROWN (A-Fork, B-Ferrule) (12)
* 200mm - 18AWG BLUE (A-Fork, B-Ferrule) (13)
* 200mm - 18AWG YELLOW/GREEN (A-Fork, B-Ferrule) (14)
Time Required Min
No estimate
Time Required Max
No estimate
Imageid
Before
Before image Before image
After
After image After image
Difficulty
Moderate
Author
Rat Rig
Public
No
Ogdc Enabled
inherit

Flags

  • In Progress added.

Steps

Step #: 1
Before
After
stepid 3288 stepid 3288
Step #: 2
Before
After
stepid 3285 stepid 3285
Step #: 3
Before
After
stepid 3286 stepid 3286
Step #: 4
Before
After
stepid 3289 stepid 3289
Step #: 5
Before
After
stepid 3282 stepid 3282
Step #: 6
Before
After
stepid 3278 stepid 3278
Step #: 7
Before
After
stepid 3279 stepid 3279
Step #: 8
Before
After
stepid 3280 stepid 3280
Step #: 9
Before
After
stepid 3281 stepid 3281
Step #: 10
Before
After
stepid 3284 stepid 3284
Step #: 11
Before
After
stepid 3297 stepid 3297