Skip to main content
Help

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

The V-Core 3.1 base panel can be installed without any disassembly

Position the base panel assembly as shown and tighten all M6x12 cap head screws to secure the the panel to the V-Core 3.

lead_screw_motor_cage_front_trim_3.1 Printed Part

lead_screw_motor_cage_back_trim_3.1 Printed Part

Install the lead_screw_motor_cage trim printed parts onto the motor cages as shown

Install four M3x12 screws into each trim to secure them to the motor cages

Your contributions are licensed under the open source Creative Commons license.