Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 60 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Remove the marked M6x12 screws from the electronics panel. Set them aside for a moment.

Remove the marked M6 washer from the electronics panel. These are no longer needed.

Right shelf assembly from Step 58

Left shelf assembly from Step 58

Tighten all 6 M6x12 screws to hold the shelves in place

Reinstall the two M6x12 screws previously removed

Take care not to over tighten the M6x12 screws as you can damage the printed parts.

Your contributions are licensed under the open source Creative Commons license.