Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

553mm 3030 Extrusion

enc_v_core_3_interface printed part

M8x12 Countersunk Screw

Slide the enc_v_core_3_interface printed part into the end of the 3030 extrusion, securing with the M8x12 screw.

Take care not to over tighten the M8x12 screw as you can damage the printed part.

Slide the 3030 Inside Hidden Corner Bracket into the other end of the extrusion as pictured.

Slide the enc_v_core_3_interface printed part into the remaining end of the 3030 extrusion, securing with the M8x12 screw.

Your contributions are licensed under the open source Creative Commons license.