Step Type:

Drag to rearrange

505mm 3030 Extrusion

Install one 505mm 3030 extrusion onto each side of the Enclosure 2.0 frame as shown

Tighten the eight marked M6x12 screws (four per side) to secure the 3030 extrusions to the frame assembly

440mm 3030 Extrusion

Install the 440mm 3030 extrusion onto the Enclosure 2.0 frame as shown

Tighten the four marked M6x12 screws to secure the 3030 extrusion to the frame assembly

Your contributions are licensed under the open source Creative Commons license.